57
VQT3Q78
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
≥
Change the mode to
.
≥
Set the iA/MANUAL/FOCUS switch to manual mode. (
l
63)
1
Select the menu.
2
(When [SET
r
]/[SET] is selected)
Adjust the microphone input level
using the cursor button right or left.
≥
Select
using the cursor button and press
the cursor button in the center to activate/
disactivate AGC. When AGC is activated, the
icon is surrounded by yellow and the amount
of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
≥
Adjust the microphone input level so that the
last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a lower setting for microphone input level.
3
Select [ENTER] using the cursor button and press the button in the center to
determine the microphone input level, then select [EXIT] and press the
button in the center.
≥
(Microphone input level meter) is displayed on the screen.
≥
When changing to intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥
When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥
The microphone input level meter shows the larger of the inputs from the microphones.
≥
You cannot record with the audio completely muted.
[MIC LEVEL]
: [RECORD SETUP]
#
[MIC LEVEL]
#
desired setting
[AUTO]:
AGC is activated, and the recording level is adjusted
automatically.
[SET
r
]/[SET]:
The desired recording level can be set.
MENU
A
Left
B
Right
C
Microphone input level
AG-AC7P-VQT3Q78_mst.book 57 ページ ２０１１年５月１８日 水曜日 午後１時４０分
