42
VQT3Q78
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to
or
.
≥
Depending on the recording conditions, start time may be longer than 1 second.
≥
In the quick power on mode, the zoom magnification becomes 1
k
.
The recording lamp lights up during recording. When this is set to [OFF], it does not light
during recording.
Touch screen operation, start and stop of recording and unit on/off can be confirmed with this
sound.
(Volume low)/
(Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (
l
92)
It adjusts brightness and color density on the LCD monitor.
≥
These settings will not affect the images actually recorded.
1
Select [LCD SET] using the cursor button and press the button in the center.
2
Select the desired setting item and press the button in the center.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3
Adjust settings using the cursor button
right or left.
4
Select [ENTER] and press the button in the
center.
≥
Select [EXIT] and press the button in the center or press the MENU button to exit the menu
screen.
It adjusts the brightness of the viewfinder.
≥
These settings will not affect the images actually recorded.
1
Select [
EVF SET
] using the cursor button and press the button in the center.
2
Adjust settings using the cursor button right or left.
≥
Adjust while checking the picture in the viewfinder.
3
Select [ENTER] and press the button in the center.
≥
Select [EXIT] and press the button in the center or press the MENU button to complete the
setting.
[QUICK POWER ON]
[OFF]/[ON]
[REC LAMP]
[OFF]/[ON]
[ALERT SOUND]
[OFF]/
/
[LCD SET]
[EVF SET]
AG-AC7P-VQT3Q78_mst.book 42 ページ ２０１１年５月１８日 水曜日 午後１時４０分
