Panasonic AG-AC120ENU Operating Instructions Manual Download

Page: 7 / 106

Shooting

Adjusting the screen display

Turn the POWER/MODE switch of the

camera <ON>. (Page 27 of Vol.1)

Press the <MENU> button.

•

Menu operation (Page 28 of Vol.1)

•

Operations may be performed with buttons on
the remote control that correspond to those on
the camera. For details, see “Remote control”
(Page 21 of Vol.1).

Viewfinder adjustments

Select [YES] in the [EVF SET] item on the setup
menu [DISPLAY SETUP] screen.

LCD monitor adjustments

Select [YES] in the [LCD SET] item on the
setup menu [DISPLAY SETUP] screen.

Select desired items by tilting the

OPERATION lever in the < > or < >

directions, and push the OPERATION lever.

Adjust the selected item by tilting the

OPERATION lever in the < > or < >

direction.

Press the <MENU> button to release menu

mode.

• Color or monochrome viewfinder display can

be selected with the [EVF COLOR] item of the
[DISPLAY SETUP] screen. Resolution is the
same for either of them.

Summary of Contents for AG-AC120ENU











































































































Search results

Summary of Contents for AG-AC120ENU

Reviews:

Related manuals for AG-AC120ENU

Brands by name

Popular brands

Panasonic AG-AC120ENU, Operating Instructions Manual

Search results

Summary of Contents for AG-AC120ENU

Reviews:

Related manuals for AG-AC120ENU

Brands by name

Popular brands