Panasonic AFP0HC32EP, User Manual, Page: 82 / 102

Instruction References
6-4

Specification of [S2] and objects to be read
• The read contents vary according to the character string set in [S2].
•
The number of read words varies according to the maximum registered node number.
Name
No. of
words
(Note 1)
Character string set in [S2] and read object
( ● : Read, Blank: Not read)
ALL
ALL +
Number
(0 to 1)
(Note 2)
NODE NORMAL STOP ERR PLC
Registered max.
node number
1
● ● ● ● ● ● ●
Cyclic
communication
Registered node
table (Note 3)
0 to 1
● ● ●
Cyclic
communication
Normal node table
(Note 3)
0 to 1
● ● ●
Cyclic
communication
Stop node table
(Note 3)
0 to 1
● ● ●
Cyclic
communication
Abnormal node
table (Note 3)
0 to 1
● ● ●
RUN/IDLE bit
monitor
(PLC standby flag)
(Note 3)
0 to 1
● ● ●
No. of read words
(Note 1)
1 to 6 1 to 6 1 to 2 1 to 2 1 to 2 1 to 2 1 to 2
(Note 1): The number of read words varies according to the registered maximum node number.
Max. node no. No. of valid words
0 0
1 to 9 1
(Note 2): When specifying "ALL + Number (0 to 1)" for [S2], the information for the number of effective words
specified by the number is read.
(Note 3): The bits in the following table are allocated to the node table numbers and RUN/IDLE bit monitor.
Bit No.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Node
no.
－ － － － － － －
9 8 7 6 5 4 3 2 1