Panasonic AFP0HC32EP User Manual Download

Page: 55 / 102

4.1

Scan List Window

4-5

When selecting each node

Display item

Description

Add Connection

Connections are added to the selected node.
Depending on target devices, more than one connection can be established for one

node.

Delete

The selected node is deleted from Scan List.

Delete All

All nodes added to Scan List are deleted.

Rearrange Scan List

Scan list is rearranged from the selected node downward.
By specifying the starting number of node number and IP address, it is rearranged.

Reallocate Device

For only Scan List, devices are reallocated from the selected node downward

By specifying the LD device starting number, devices are automatically reallocated.

Copy

The selected node is copied.

Cut

The selected node is cut.

Paste

The copied node is pasted after the selected node.

Device Property

The device property of the selected node is displayed.

Device Setting

The device setting of the selected node is displayed.

Summary of Contents for AFP0HC32EP







































































































Search results

Summary of Contents for AFP0HC32EP

Reviews:

Related manuals for AFP0HC32EP

Brands by name

Popular brands

Panasonic AFP0HC32EP, User Manual

Search results

Summary of Contents for AFP0HC32EP

Reviews:

Related manuals for AFP0HC32EP

Brands by name

Popular brands