Operation manual for Narrow-pitch connectors A4S
Panasonic Corporation
industrial.panasonic.com/ac/e/
©
Panasonic Corporation 2015
ACCTF6E-2 201506
- 18 -
03-4. Detailed precautions for solder rework
(1)
Flux-applying tool
To prevent solder creeping to a contact section,
we recommend the use of a
brush pen
that can
apply an appropriate amount of flux.
(e.g., BON-102F, Japan Bonkote)
(2)
Selection of soldering iron
For narrow-pitch connectors with a 0.4-mm pitch, we recommend:
-
An iron tip with a
retractable-knife shape
Ex. Japan Bonkote
- With a temperature sensor on the iron tip
- Temperature-controllable iron tip
It is also necessary to check that there are no differences between the
indicated temperature and the actual temperature of the iron tip.
The following temperatures are recommended for iron tips:
- Eutectic solder: 300–320˚C
- Lead-free solder of three elements: 340–360˚C
Conventional tool: Dropper
Recommended: Brush pen
(B15-KF)
(B17-KF)
Summary of Contents for A4S
Page 28: ...ACCTF6E 2 201506 ...
