Panasonic 2LINE KX-TG9581 Series, Operating Instructions Manual

Page: 27 / 100

Making cellular calls
Important:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the
corresponding CELL indicator lights up
(page 16).
1
Dial the phone number.
R To correct a digit, press M CLEAR N .
2
Press the desired cellular line key ( M CELL 1 N
to M CELL 4 N ).
3
Lift the corded handset.
4
When you finish talking, place the corded
handset on the cradle.
Note:
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 29).
A Handset: M CELL N
*1
a MbN : Select the
desired cellular phone. a M SELECT N
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 21).
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N .
R During a conversation with the corded handset,
you can switch to the speakerphone by pressing
M N , then place the corded handset on the
cradle.
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Making a cellular call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
M REDIAL N
2
MbN : Select the desired phone number.
3
Press the desired cellular line key ( M CELL 1 N
to M CELL 4 N ), then lift the corded handset.
Erasing a number in the redial list
1
M REDIAL N
2
MbN : Select the desired phone number. a
M ERASE N
3
MbN : “
Yes
” a M SELECT N
4
M EXIT N
Making landline calls
1
Dial the phone number.
R To correct a digit, press M CLEAR N .
2
Lift the corded handset.
R An available line is automatically selected
and either the LINE 1 indicator or LINE 2
indicator lights up. To change the line
selection mode, see page 18.
R You can also select the line manually by
pressing
M LINE 1 N or M LINE 2 N before lifting
the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
Note:
R You can also dial the phone number after lifting
the corded handset.
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 29).
A Handset: Press the corresponding line key
( M L1 N or M L2 N ).
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N .
Using the speakerphone
1
During a conversation with the corded
handset, press
M N to turn on the
speakerphone.
R You can place the corded handset on the
cradle.
R Speak into the base unit microphone.
R Speak alternately with the other party.
2
When you finish talking, press M N .
Note:
R To switch to the receiver, lift the corded handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
M REDIAL N
2
MbN : Select the desired phone number.
3
Lift the corded handset.
For assistance, please visit http://www.panasonic.com/help 27
Making/Answering Calls Using the Base Unit
TG958x_0704_ver031.pdf 27 2014/07/04 10:32:26