Panasonic 2LINE KX-TG9581 Series, Operating Instructions Manual

Page: 18 / 100

4
Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
5
Proceed with the operation for your unit.
Handset: * : Select “
AM
” or “
PM
” .
Base unit: M AM/PM N : Select “
AM
” or “
PM
” .
6
M SAVE N
7
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
Spanish is selected, 24-hour clock format is
used.
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting message.
See page 62 for details.
Handset / Base unit
1
For line 1: M MENU N#3021
For line 2: M MENU N#3022
2
MbN : Select the desired greeting message. a
M SELECT N
3
MbN : “
Yes
” a M SELECT N
4
Record a greeting message. a M STOP N
5
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Other settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“
Tone
” .
“
Tone
” : For tone dial service.
“
Pulse
” : For rotary/pulse dial service.
Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1
M MENU N#120
2
MbN : Select the desired setting. a M SAVE N
3
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Line selection mode for landline
The line selection mode determines which line is
selected when:
– you lift the corded handset
– you press
M N / MZN on the handset (when
making/answering calls)
– you press MZN on the base unit (when making/
answering calls)
The following setting is available:
–
“
Auto
” (default): When making a call, line 1 is
selected. If that line is unavailable, line 2 is
selected. When you call back using the caller
list (page 54) or while listening to a message
(page 63, 64), the indicated line is used.
When answering a call, the ringing line is
selected.
– “
Line1
” : Line 1 is selected.
– “
Line2
” : Line 2 is selected.
Handset / Base unit
1
M MENU N#250
2
MbN : Select the desired setting. a M SAVE N
3
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Note:
R You can select a line manually regardless of the
line selection mode by pressing
M L1 N / M L2 N on
the handset or M LINE 1 N / M LINE 2 N on the base
unit.
18 For assistance, please visit http://www.panasonic.com/help
Getting Started
TG958x_0704_ver031.pdf 18 2014/07/04 10:32:25