Panasonic 2-LINE KX-TG9551 Series, Operating Instructions Manual

Page: 45 / 88

R You can program this setting using either the
base unit or one of the handsets.
Storing unwanted callers
You can store up to 250 phone numbers in the call
block list.
Important:
R We recommend storing 10 digits (including an
area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will be
blocked.
n From the caller list:
Handset
1
MCN CID
2
MbN : Select the entry to be blocked.
R To edit the number: M MENU N a MbN :
“
Edit
” a M SELECT N
Press M EDIT N repeatedly until the phone
number is shown in the 10-digit format. And
then, press
M SAVE N . Go to step 5.
3
M MENU N
4
MbN : “
Save CID
” a M SELECT N
5
MbN : “
Call block
” a M SELECT N
6
MbN : “
Yes
” a M SELECT N
7
Edit the phone number if necessary (24 digits
max.).
8
M SAVE N a M OFF N
Base unit
1
M CID N
2
MbN : Select the entry to be blocked.
R To edit the number, press M EDIT N
repeatedly until the phone number is shown
in the 10-digit format.
3
M SAVE N
4
MbN : “
Call block
” a M SELECT N
5
MbN : “
Yes
” a M SELECT N
6
Edit the phone number if necessary (24 digits
max.).
7
M SAVE N a M EXIT N
n By entering phone numbers:
Handset
1
M MENU N#217
2
M MENU N a MbN : “
Add
” a M SELECT N
3
Enter the phone number (24 digits max.).
4
M SAVE N a M OFF N
Base unit
1
M MENU N#217 a M ADD N
2
Enter the phone number (24 digits max.).
3
M SAVE N a M EXIT N
Blocking incoming calls without phone number
You can reject a call when no phone number is
provided, such as a call just showing
“ Out of
area
” .
Handset / Base unit
1
M MENU N#240
2
MbN : Select the desired setting. a M SAVE N
3
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Note:
R When the unit receives a cellular call without a
phone number, the call may not be rejected.
Setting the first ring for the call block list
Handset / Base unit
If you do not want the first ring from a number on
the call block list to sound, turn the first ring setting
to
“
Off
” . The default setting is “
On
” .
1
M MENU N#173
2
MbN : Select the desired setting. a M SAVE N
3
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Viewing/editing/erasing call block numbers
Handset
1
M MENU N#217
2
MbN : Select the desired entry.
R To exit, press M OFF N .
3
To edit a number:
M EDIT N a Edit the phone number. a
M SAVE N a M OFF N
To erase a number:
M ERASE N a MbN : “
Yes
” a M SELECT N a
M OFF N
For assistance, please visit http://shop.panasonic.com/support 45
Programming
KX-TG954x_955x_OI(en)_0507_ver432.pdf 45 2018/05/07 14:00:44