8/19/03
910-198E
Model 8500
Page 5-7
Primary Data Set to Bottom
5.1.6 Max/Min Clear
The Max/Min Clear function can be set to either ON or OFF. When
Max/Min Clear is turned ON and the MIN or MAX mode is also
enabled, the operator may press the [MEAS], [SEND], or [SAVE] key
to clear the Minimum or Maximum Value on the screen until the next
measurement is taken. By default, the Max/Min Clear function is
turned ON and will be set to ON after performing a Measurement or
Master Reset.
5.1.7 Max/Min Delay
The Max/Min Delay works in conjunction with the Max/Min Clear
function to set a time delay once a Max/Min has been set or cleared.
This delay prevents the gage from updating a Min reading while the
operator re-positions the target ball to a new measurement location.
Max/Min Delay can be set to 0.0, 0.5, 1.0, 1.5, 2.0, 2.5, or 3 seconds.
By default, this function is set to 0.0 and will be reset to 0.0 after
performing a Measurement or Master Reset.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
