8/19/03
910-198E
Model 8500
Page 4-3
4.1
Save/Send Parameters
The operator may choose to Save thickness values to the Datalogger or
Send data to an external device. However, Saving and Sending values
depend where each value (MIN, MAX, or DIFF) appears on the
screen.
For example, in order to Save or Send a MIN value that is located on
the Secondary Display, the Save/Send parameter must be set to
“Secondary”. By default, when the user turns on the MIN, DIFF, or
MAX mode, the Send function will automatically be set to
“Secondary”. After the parameter is set, simply press the [SAVE] or
[SEND] key.
To Change the Save/Send Parameters to Secondary:
1.
Press [SETUP].
2.
Use the [ ] and [ ] keys to select Communication. Press
[ENTER].
3.
Use the [ ] and [ ] keys to select Save/Send.
4.
Use the [
] or [
] key to select Secondary. Press [MEAS].
In order to Save or Send a MIN value located on the Primary Display,
the Save/Send parameter must be set to “Primary”. After the parameter
is set, simply press the [SAVE] or [SEND] key.
To Change the Save/Send Parameters to Primary:
1.
Press [SETUP].
2.
Use the [ ] and [ ] keys to select Communication. Press
[ENTER].
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
