38
Model C-ET Installation Guide
1.5 Specifications
Transducer No.
536-038-03
536-038-02
Primary Use
Large Pipes
Small Pipes
Installation Type
Clamp On
Material of Construction
Waveguide and C-RS Transducer
Pipe Sizes
3” to 24” diameter
Clamping Fixture
C-ET-V, C-ET-PI
Operation Frequency
500kHz
1MHZ
Electrical Rating
200V peak-to-peak
Ambient Temperature Range
–40° to 75°C
–40° to 75°C
Process Temperature Range
–200° to 400°C
–200° to 400°C
North American Certification -
Explosion Proof
Class I, Division 1, Group B, C, D
European Certification -
Flameproof
II 2GD, EEx md IIC T6 Tam
–40 to 75°C KEMA 03ATEX1540X
North American Certification -
Weatherproof
IP66, Type 4X
200 Vpp, 5mA
European Certification -
Weatherproof
IMPORTANT:
The transducer is protected by a suitable fuse located in the
flowmeter electronics. The fuse has a breaking capacity in
accordance with the short circuit current of the supply.
IP 66
Summary of Contents for C-ET
