Pg. 8
• it is away from hot, humid conditions and strong sunlight
Radio signals between handset and base unit
To use your handset and base unit together, you must be able to main-
tain a radio link between them. Be aware that any large metal objects,
like a refrigerator, a mirror, filing cabinet, etc, between the handset and
the base unit may block the radio signal. Other solid structures, like
walls, may reduce the signal strength.
inTerFerence
If the sound quality gets worse as you move around while on a call,
this is probably caused by interference between the handset and the
base unit, perhaps because you are too near to another phone or
other electrical equipment. Move to a different position to clear the
interference. If you do not move, it might cause a short break or your
call may be cut off.
Mains power connection
iMporTanT
- The base unit and charger pod must be used with the
mains adapters supplied with the unit.
Using any other adapter will result in non-compliance with EN60950,
and will invalidate any approval given to this apparatus.
Battery safety - caUTion
onLy
use the rechargeable batteries supplied with the handset.
Do noT
use non-rechargeable batteries - they may explode and
cause damage to your telephone.
caUTion
riSk oF eXpLoSion iF BaTTery iS repLaceD By an
incorrecT Type.
DiSpoSe oF USeD BaTTerieS accorDing To The
inSTrUcTionS.
checking your answering machine messages remotely
(Only for TAM models)
Before you can use the remote access feature to check your answer-
ing machine messages, you must change your master PIN code. Your
master PIN code cannot be the default 0000.
installation and Set-up
Fit the rechargeable batteries in each handset
1) Install the AAA batteries (Brand name: CORUN, Capacity: Ni-MH 1.2V/
550mAh, or Brand name: SANIK, Capacity: Ni-MH 1.2V/550mAh) into hand-
set in accordance with the polarity marked in the battery compartment.
