Pg. 22
If you select ON ONCE or ON DAILY, enter the time (HH-MM) for the
alarm and press the UP/DOWN key to select AM or PM if the time is
in 12 HOURS format.
5. Press OK key to confirm. A confirmation beep is played.
Set alarm tone
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select CLOCK&ALARM and then press
OK key to select.
3. Press the Navigation key to select ALARM TONE and then press
OK key to select.
4. Press the Navigation key to select MELODY 1, MELODY 2 or
MELODY 3 and then press OK key to confirm. A confirmation beep
is played.
aDvanceD USe oF yoUr TeLephone
change Master pin
The Master PIN is used for registration/unregistration of handsets and
for accessing the answering machine remotely. The default Master PIN
number is 0000. The maximum length of the Master PIN is 8 digits.
Note: If you forget your PIN code, you can reset it to its default 0000
using a handset Reset (page 15).
1. Press MENU key to enter menu selection.
2. Press the Navigation key to select ADVANCED SET and then press
OK key to select.
3. Press the Navigation key to select CHANGE PIN and then press
OK key to select.
Enter the current Master PIN when prompted and then press OK key
to confirm.
As you enter the PIN it will be shown as asterisks (*) on the screen.
(Enter the new PIN and then press OK key to confirm. A confirmation
beep is played.)
register your handset
IMPORTANT: When you purchase a telephone, all handsets are al-
ready registered to the base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets
or if a handset has become faulty.
The procedures described below are for a PA-7831 handset.
They may be different if you want to register another handset model,
in which case you should refer to its user guide.
Additional handsets must be registered to the base unit before you can