Pg. 18
playback and delete messages
The last recorded message is played first via the loudspeaker on
model
Old messages cannot be played again until after all new messages
have been played.
playback recorded messages
1. Press the MENU key to enter menu selection.
2. Press the Navigation key to select ANSW MACHINE and then press
OK key to select.
3. Press the OK key to start playback.
* During message playback you can press MENU key, then Naviga-
tion to select options to REPEAT the current message, skip forward
to the NEXT
message, skip back to the PREVIOUS message or DELETE the cur-
rent message.
Delete all recorded messages
1. Press the MENU key to enter menu selection.
2. Press the Navigation key to select ANSW MACHINE and then press
OK key to select.
3. Press the Navigation key to select DELETE ALL and then press OK
key to select.
Using the intercom
Intercom, call transfer and conference are only possible with at least 2
handset registered to the same base station. It allows you to make free
internal calls, transfer external calls from one handset to another, and
set up a 3-way conference with two handsets and an external call.
If you try to make a call while another handset is already on an exter-
nal call, you’ll hear a busy tone for a few seconds before the display
returns to idle.
intercom another handset
Press INT key in idle mode.
Intercom is established immediately if there are only 2 registered
handsets.
If there are more than 2 registered handsets, the handset numbers
which are available for intercom, and a * , will be displayed. Press the
specific handset number you wish to call, or press * to ring all hand-
sets, to start intercom.
Transfer an external call to another handset
During the call, press INT key to put the external call on hold
