© Pan Acoustics GmbH
V 1.0
Page 8 of 22
Manual
9. Connections
Pan Net is Pan Acoustics’ control and audio distribution network. Depending on the Pan Net interface,
one or more daisy chain cables or other cable types are supported. Depending on the interface, the Pan
Net cabling supports two-channel analogue and digital (AES3) audio. In a Dante/AES67 network, the
control data from Pan Net are tunnelled through the IP-based audio network.
Daisy chain cabling
Cabling type in which the devices are connected serially, i.e. in series one after the other
General Purpose Interface (GPI)
Describes a platform-independent connection between devices from diff erent manufacturers
9.1. P SW-208 | SP connector panel and variants
9.1.1. P SW-208 | SP and P SW-208 | SP | AES connector panel
To avoid malfunctions, the recommended bending radius of the mains power and signal connection
cables must be observed.
The warnings on the connector panel must be observed.
TO REDUCE THE RISK OF FIRE OR ELECTRICAL
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE!
MAINS INPUT
AC - 100 - 240 V, 50/60 Hz
30 W / MAX POWER: 800 W
SAFETY CLASS I
TO REDUCE THE RISK OF
ELECTRICAL SHOCK - DO NOT
REMOVE THE MAINS GROUND
CONNECTION!
No.
Description
[1]
Pan Net IN / THRU
Input & output for audio signals (ana-
logue and AES3), control signals and
relay contact (GPI)
[2]
Status LED
Display for operating status
[3]
IEC-60320 C13 mains power socket
[2]
[1]
[3]
