6 Installation
1-800-773-7931 WWW.PALSTAR.COM
Unpacking
Carefully remove the AT2KD
from the shipping carton and
inspect it for signs of damage. If
any damage is apparent, notify
the transportation carrier or
dealer immediately.
We recom-
mend keeping the packing
carton for moving, storing or
reshipping the tuner to us for
repair if required.
Location
Select a location for the AT2KD
that allows the connectors to be
free from any operator contact
during operation.
Installation Procedures
Connect a coax cable from your
transmitter to the RF INPUT
connector on the rear panel.
Keep the cable as short as pos-
sible. If you use a linear ampli-
fier, connect your transmitter to
the linear amplifier input and the
linear amplifier output to the
AT2KD.
Do not use more than
1500 Watts average (single
tone) through the tuner.
Connect coax cable(s) from
your antenna to COAX 1 or
COAX 2 connectors on the rear
panel. These connectors are
either direct from the transmitter
or through the tuned circuit de-
pending on the setting of the
DIRECT/TUNED mode switch
on the front panel.
Connect a dummy load to the
BYPASS connector using a
coax cable. This lets you select
the dummy load from the
DIRECT/TUNED mode switch.
Any antenna that does not re-
quire the use of an antenna
tuner may be connected to the
BYPASS connector, if desired.
Service and Warranty 15
1-800-773-7931 WWW.PALSTAR.COM
Limited Warranty
Palstar Inc. warrants products manufactured by it to be free from de-
fects in material and workmanship under normal use and service
for a
period of one (1) year from the date of delivery to the first
buyer
(the “Warranty Period”). Palstar Inc’s obligation under this war-
ranty is limited to repair or replacement of the product; at its option at
the Palstar factory in Piqua, OH.
Effective only when the product is returned to the factory with all trans-
portation charges prepaid and examination of the product discloses in
Palstar’s judgment, to have been defective during the Warranty Period.
The Warranty Period shall not extend beyond its original term with
respect to interim in-warranty repairs by Palstar. This Warranty Period
shall not apply to any product which has been repaired or altered by
anyone other than Palstar without prior written authorization. War-
ranty does not extend to any products which have been subject to dam-
age from improper installation, application or maintenance in accor-
dance with the operating specification. Palstar neither assumes nor au-
thorizes any person to assume for it any obligation or liability other than
herein stated.
Repair Policy
When sending in a product for service, please “double” box it carefully
and ship it insured for your protection. Please include a note clearly
describing the problem, how you wish the item returned and how you
wish to pay for the service. Package your unit properly. Palstar, Inc. is
not responsible for merchandise damaged in shipment. Our service rate
is $30 per hour (1/2 hr. minimum).
Return Policy
All returns must receive prior authorization from Palstar. Returned
items must be received in original—AS SHIPPED– condition including
the original box, manuals, accessories, and copy of sales receipt. Returns
must be within 14 days of purchase. Returned items are subject to a
25% restocking fee. Shipping is not refundable.