Notes:
When the HD monitor gets signal from external equipment (such as Set top box, computer, DVD, etc.)
through XGA interface, because of signal difference, the screen colour may not be in optimum state,
this time, you can adjust and item in the SCREEN ADJUST menu until you get satisfying
colour.
Using or can restore the value of and to default setting.
Balance pincushion distortion.
Adjust the picture's horizontal size.
OSD menu introduction & Operation examples
OSD menu introduction (continued)
31
?
9300
6500
EXIT
CONTRAST
Adjust the picture contrast.
BRIGHTNESS
Adjust the picture brightness.
H-SIZE
H-PHASE
Adjust the horizontal position of the picture.
V-SIZE
Adjust the picture's vertical size.
V-PHASE
Adjust the vertical position of the picture.
PIN-BALANCE
PINCUSHION
Pincushion correction.
TRAPEZOID
Correct the trapezoid distortion.
PARALLELOGRAM
Adjust the angle between horizontal and vertical.
H-MOIRE
Eliminate horizontal moire.
V-MOIR
Eliminate vertical moire.
ROTATION
Rotate the current picture.
RECALL
To restore to original factory preset mode.
ENGLISH/CHINESE
English/Chinese menu on-screen display language
selection.
DEGAUSS
Manually degauss the set
R
Adjust white balance R at current colour temperature
(red adjustment).
G
Adjust white balance G at current colour temperature
(green adjustment).
9300K
Restore the current picture's colour temperature to
9300K.
6500K
Restore the current picture's colour temperature to
6500K.
EXIT
Exit the current OSD and store all the current
adjusted parameters.
6500
9300
R
R
G
G
R
G
