Basic Operations
Turning on/off & Signal source selection
11
Turning on
Press the main
POWER SWITCH
, the red power indicator lights
up, the set is in standby mode.
Press the
POWER
button on the remote controller to turn on the
set, and the power indicator turns to yellow. Or you can directly
press
Channel up/down
button on the set to turn on the set.
To turn off the set completely, press the main
POWER SWITCH
.
To turn off the set temporarily, press the
POWER
button on the
remote controller, the set is in standby mode, the indicator turns
to red.
If
Power Restore
item in
OPTION
sub-menu is set to
ON
, next
when you press Power Switch to turn on, the TV will directly be
in
Power On
mode.
Even if you set
Power Restore
to
OFF
while you quickly switch
off/on the TV the TV will also be in
Power ON
mode directly.
Press the
AV/TV
button to display signal
source selection menu.
Press the
CH
or
CH
button to select one
of RF/AV1(SAV1)/AV1(SAV2)/AV3(SAV3)
/YCbCr/XGA/YPbPr.
Press
VOL
or
VOL
button to confirm your choice.
If you select XGA or YPbPr as signal source, later on you can
directly press
HD/TV
button to switch between the previous
viewing mode (RF or VIDEO mode) and HDTV mode.
When the remote operation is received by the set, the TIMER
indicator (green) on the set's front will glitter to inform the user.
The buttons in this manual refer to the ones on the remote
controller if without special indication.
2
1
3
Note:
Note:
Turning off
Signal source selection
2
1
2
1
RF
AV1
AV2
AV3
YCbCr
YPbPr
