26
27
GB
4.2. Control panel functional information
Button
Description of function
UV
This robot has a built-in UV light which disinfects the floor, particularly useful
for people who suffer from allergies or in houses with pets.
a. Press "UV" to turn the ultraviolet light on/off.
b. The UV light will only work when the robotic vacuum is switched on, and
will switch off when you turn off the robot.
c. I/O mode on the UV light will be stored automatically.
INICIO/PARO
START/STOP
a. Remove all small objects or obstacles from the room before cleaning, then
press I/O to start cleaning in spiral, linear or zig-zag mode or along the walls
automatically.
b. When starting the device, you can select either fast or slow mode (using
the remote control).
c. When the battery is low, the robot will stop working; it will then beep ten
times and search for the docking station to charge automatically.
d. The robot will stop cleaning as soon as you press I/O. .
CARGA/
CHARGE
a. When you press CARGA/CHARGE, the indicator will light up.
b. When the machine returns to the docking station for charging, the indicator
will start flashing
1. When the machine is turned on in standby mode, the indicator will light up.
2. When the battery is low, the indicator will flash.
3. When the battery is fully charged, the indicator will light up as normal
4.3. Installing the docking station and recharging the robot
Automatic recharge
1. Install the docking station securely on a flat
floor (attach to the wall using the docking station
adhesive).
2. There must be no obstacles or holes within 3
metres of the front of the docking station or 0.5m
to the left and right (See figure 1).
3. The robot cannot locate the docking station for
charging if the window for transmitting the infrared
signal from the charger is covered.
4. Connect the adapter outlet to the recharging
station connection. (See figure 2).
Run the adapter power cable along the
wall as it could interfere with the brushes
or wheels.
Automatic charge
The main unit will search for the docking station to charge automatically in case the battery runs low
during cleaning.
Manual charge
1. You can use the robotic vacuum cleaner
adapter or the docking station to charge the
main unit directly.
2. Connect the adapter outlet to the DC socket on
the main unit when charging with the adapter.
(See figure 3).
3. Before charging, connect the adapter to
the docking station making sure the robotic
vacuum is supported against the docking
station. (See figure 4).
4. When you want to charge the machine, press
CHARGE on the remote control. The machine will
locate the docking station within its radius of
action and will begin charging. (See figure 5).
figure 1
figure 2
High voltage!
Risk of electric shock! Dry hands
before using!
figure 3
figure 4
High voltage!
Risk of electric shock! Dry hands
before using!
High voltage!
Risk of electric shock! Dry hands
before using!
