For larger pools, or for further season extension, you can join together several heat collectors in a series or parallel.
Drawing C – A System Joined in a Series
Drawing D – A System Joined in Parallel
For parallel joining you should purchase 25 mm T connectors (not included)
Note: Direction of the connection to the pump and to the pool is not important.
»
Routine Usage
To prevent heat loss at night and when the pool is not in use, it is recommended to cover it with a thermal insulating cover.
If the pool water is sufficiently warm, cover the Solar AquaDome to hide it from sun radiation. You can also stop the operation of
the pump during hours of intense sun radiation.
It is recommended to use a timer for automatic switching the pump on and off and for automatic starting and stopping the water
circulation in the heat collectors, for convenience and for ensuring that the pump operates during the desired hours.
Alternate "On & Off" operation of the pump will cause extremely hot water to come out of the heat collectors.
»
Cleaning and Maintenance
•
Clean the Solar AquaDome with a damp cloth and clean water only. Do not use chemicals to clean the Solar AquaDome.
•
Solar AquaDome is designed and manufactured to resist materials used in pools (e.g., Chlorine, salt), do not place any other
substances in the Solar AquaDome and verify that only pool water, designated for bathing and swimming flow through it.
•
Do not use oil based lubricants.
•
Do not disassemble the heat collector and do not separate the dome from the base.
•
At the end of the bathing season or whenever you stop using the Solar AquaDome for an extended period,
disconnect the connectors, remove the pipes and drain out all the water. Store the Solar AquaDome as one whole unit.
•
Store the Solar AquaDome in an enclosed place, protected from extreme cold.
PLC2
PLC3
Solar AquaDome
Solar AquaDome
Pool
Pump
Solar
AquaDome
Solar
AquaDome
A
B
Pool
Pump
38mm
1½”
32mm
1¼”
Solar
AquaDome
Solar
AquaDome
Solar
AquaDome
Solar
AquaDome
T - 25mm
Version 1 10/10
