![background image](http://html1.mh-extra.com/html/palram/green-line/green-line_assembly-instructions-manual_749467016.webp)
13
*Insert the screws from the outside, tighten nuts only 2-3 turns and leave loose.
Slide screw 411 inside
profiles A102 at the top
connect it to the ridge A141
and at the bottom-to the
gutter A136.
NOTE
: Repeat the above
assembly procedure to all
profiles A102 on the roof.
NOTE:
The vent in the roof
can be inserted replacing
one of the middle panels.
In order to assemble the
vent you have to insert an
additional screw 411 into
both profiles A102 (a) on
either side of the vent.
These two additional
screws will be used later.
* Use only one screw 411 in
step (b).
A102 / 6
a
412
A102
A102
412
411
411
b
A102
A102
A102
412
412
412
412
412
412
411
b
411
a
a
411