background image

 

 

 
 

(1)  Remove heater from carton. 

 

(2)  Please ensure that the gas specified on the rating plate matches your gas supply.  

 WARNING:   

 

Using a different type of gas may cause an explosive ignition resulting in injury, damage to 
heater or malfunction of the oxygen depletion safety system. Do not install heater if it is the 
wrong gas type. Please contact your place of purchase immediately. 

 

(3)  Check  room  sizing  –  refer  specifications.  Do  not  install  if  the  actual  room  size  is  less  than  the 

specified  minimum  room  size  requirements  as  the  heater  may  shut  down  due  to  oxygen 
depletion. 

 

Notice to Victorian Customers:

 This appliance must be installed by a licensed person as required 

by the Victorian Building Act 1993. Only a licensed person will give you a compliance certificate 
showing that the work complies with all relevant standards. Only a licensed person will have 
insurance protecting their workmanship for 6 years. Make sure you use a licensed person to install 
this heater and ask for a compliance certificate. – Message from the Victorian Plumbing 
Commission. 
 
 
 
 
 
 
 
To ensure safe and proper use of this heater, please read these instructions carefully. 
 

Danger 

– Indicates an immensely hazardous situation which, if not avoided, will result in serious 

injury or death in the most extreme situations. 

 
Warning

 – Indicates a potentially hazardous situation which, if not avoided, could result in serious 

injury or death in the most extreme situations.  

 
Caution

 – indicates a potentially hazardous situation which, if not avoided, may result in minor 

injury.   
 
 
 
 
 
 
If a gas leak is detected: 

  Do not turn power switches on or off. 

  Do not plug or unplug electrical appliances.  

  Do not use the telephone. 

 
Flame or sparks may ignite the gas and cause a fire: 

  Cease operation immediately by closing the gas valve. 

  Open windows and doors for ventilation. 

  Contact your gas supplier, a licensed plumber or Rheem Service on 131 031. 

 
 

Preparation 

Danger 

Safety Instructions 

Summary of Contents for PG-451S

















Reviews: