Connect Power to a PA-3400 Series Firewall
Connect Power to a PA-3400 Series Firewall
The following procedure describes how to connect AC power to a PA-3400 Series firewall with AC
power supplies.
Learn how to
Set Up a Connecon to the Firewall
based on your desired boot mode prior to
powering on the firewall for the first me.
To avoid injury to yourself or damage to your Palo Alto Networks
®
hardware or the data
that resides on the hardware, read the
.
STEP 1 |
Remove the nut and star washer from the ground stud on the back of the firewall.
STEP 2 |
Crimp a 14AWG ground cable to a ring lug (cable and lug not included) and then aach the
ring lug to the ground stud on the firewall. Replace the star washers and nuts and torque to
25 in-lbs. Connect the other end of the cable to earth ground.
STEP 3 |
Connect the AC power cord to the power input on the back of the firewall.
PA-3400 Series Next-Gen Firewall Hardware Reference
30
©
2022 Palo Alto Networks, Inc.
