7
GETTING STARTED
SAFETY / SPECIFICATIONS
ASSEMBLY / INSTALLATION
OPERATION
TROUBLESHOOTING
MAINTENANCE / REPAIR
OPERATION - MODEL 9682905 GRINDER / SHARPENER - FUNCTIONAL PARTS
12. Diamond
dressing tool
14. Grinding shaft
clamping knob
11. Diamond disc
(Extra corundum
disc included)
10. Locking
bayonet lever
9. Tool
carrier
head
7. Tool carrier
head vertical
axis clamping
lever
8. Tool carrier
head in and out
adjustment
6. Tool carrier
shaft clamping
lever
13. Tool carrier
head horizontal
rotation axis
clamping lever
5. Tool
carrier
shaft
3. Tool carrier
shaft lock
knob
4. Oil ports
2. Tool carrier
shaft lateral
movement
knob
1. Knob to
shift grinding
wheel laterally
1. Knob to shift grinding wheel laterally
Turning this knob moves the grinding wheel laterally, left-to-
right from the operator’s viewpoint.
2. Tool Carrier Shaft Lateral Movement Knob
Turning this knob moves the tool carrier left-to-right along the
tool carrier shaft.
3. Tool Carrier Shaft Tension Knob
Tightening this knob puts tension on the carrier shaft. Pulling
back on the carrier head rotates the shaft to a retractable stop
point.
4. Oil Ports
Maintain the tool by oiling the moving parts through these
ports.
5. Tool Carrier Shaft
The tool carrier clamps on this bar, laterally and rotationally.
6. Tool Carrier Shaft Clamping Lever
The lever locks the tool carrier along the carrier shaft. The
shaft still has a retractable spring load applied to it based on
the Lateral Shaft Movement Knob, #12.
7. Tool Carrier Head Vertical Axis Clamping Lever
The lever locks the carrier head in a fixed position. Loosen the
lever and the head will rotate vertically, left-and-right (like a
clock dial) from the operator’s viewpoint.
8. Tool Carrier Head in and out adjustment
Turning the thumb screw on the left advances the carrier head
in-and-out from the operator’s viewpoint.
9. Tool Carrier Head
The twist drill bit, end mill and lathe accessories work in
conjunction with the head. The twist drill bit accessory inserts
into the collet portion of the head. The end bit and lathe
accessories replace the head completely.
10. Locking Bayonet Lever
The lever has three settings that control the rotation of the
collet holding the bit being sharpened.
11. Diamond Cup Wheel (extra corundum disc included)
When replacing the cup wheel, make sure the new wheel
meets or exceeds the machine’s RPM rating.
12. Diamond Dressing Tool
Flip the dressing bracket over to engage the diamond tool to
the grinding wheel. Dressing the wheel creates a flat grinding
surface.
13. Tool Carrier Head horizontal rotation axis clamping lever
The lever locks the carrier head in a fixed position. Loosen the
lever and the head will rotate horizontally, left-and-right from
the operator’s view.
14. Grinding Shaft Clamping Knob
Tightening this knob locks and prevents the grinding wheel
from being adjusted laterally, left-to-right.
