Palmgren Operating Manual & Parts List
49181A
DESCRIPTION
Palmgren Milling Table is manufactured
from cast iron and steel. The table fits most
drill presses. Milling operations can be done
by moving work right and left (longitudi-
nal), or front and back (cross) directions. The
table can also be used to accurately posi-
tion or index a workpiece under a drill bit
when not doing milling operations.
UNPACKING
Check for shipping damage. If damage has
occurred, a claim must be filed with carrier
immediately. Check for completeness.
Immediately report missing parts to dealer.
IMPORTANT: The tool has been coated
with a protective coating. In order to
ensure proper fit and operation, the coat-
ing must be removed. Remove coating
with mild solvents, such as mineral spirits,
and a soft cloth. Nonflammable solvents
are recommended. After cleaning, cover all
exposed surfaces with a light coating of oil
Be sure to lubricate table as described in
“Maintenance”.
CAUTION:
Never use highly volatile
solvents. Avoid getting cleaning solu-
tion on paint as it may tend to deterio-
rate these finishes. Use soap and water
on painted components.
SAFETY RULES
•
Understand and follow all safety
instructions supplied with drill press or
other machines on which milling table
is used.
•
Mount table to work surface by bolting
or clamping base securely in at least
four mounting locations.
•
Be alert and think clearly. Always check
your setup; for example, rotate acces-
sory by hand before applying power.
•
Make sure workpieces, guides, fences,
or power heads are securely clamped,
as applicable. Do not force accessory.
Be positive you are feeding in right
direction.
•
Never feed “free-hand” without table
guide and/or guides. Use vises or
appropriate clamps to secure each
workpiece, securely clamping them to
work surface.
•
Use only accessories designed for mill.
Keep power tool guard in place. Dress
properly. Do not wear jewelry, gloves,
or loose clothing.
•
Wear a face shield or safety glasses.
Never place hands in jeopardy.
DIMENSIONS
Refer to Figure 1.
2
A
W
L
B
H
Figure 1 - Dimensions
Stock No.
49181A
Table Length
A
18
5
/
8
“
Table Width
B
6“
Height
H
5
3
/
16
“
Base Length
L
12“
Base Width
W
7
1
/
8
“
Longitudinal Travel
12“
Cross Travel
8“
Value of One Division
0.001”
Cross Travel per
One Revolution
0.100”
Longitudinal Travel per
One Revolution
0.100”
