Palm 700wx - Treo Smartphone 60 MB, Using Instructions

Page: 210 / 288

C U S T O M I Z I N G Y O U R S M A R T P H O N E
C O N N E C T I O N S E T T I N G S
202
9
CH
AP
T
E
R
Connects to: Specifies whether this
connection connects to the Internet or
to Work. You may need to select Work
to access a corporate intranet.
This is a device-to-device (adhoc)
connection:
Indicates whether you’re
connecting to another device or to an
access point (network).
7 Select the Network Key tab, and then
set the following:
Authentication: Sets the method used
to identify devices that connect to the
network.
•
Open: Indicates that the network
uses open authentication.
•
Shared: Indicates that the network
uses shared authentication.
•
WPA: Indicates that the network is a
WPA network that uses 802.1x
protocols.
•
WPA-PSK: Indicates that the network
is a WPA network that requires a
pre-shared key (password).
Data Encryption: Sets the encryption
method. The options in this list vary
based on your Authentication setting.
•
Disabled: Turns data encryption off.
•
WEP: Turns on the wired equivalent
privacy encryption method.
•
TKIP: Turns on the temporal key
integrity protocol encryption method.
This method is often used to encrypt
WPA and WPA-PSK connections.
The key is automatically provided:
Indicates whether you need to specify
the Network key and Key index provided
by your system administrator, or
whether the network provides this
information. The availability of these
options varies based on your
Authentication and Data Encryption
settings.