MEMBRANE INSTALLATION
12” Inline 5 Micron Spun (Sediment) Filter
12” Inline Gac Carbon Cartridge Filter (UDF)
12” Inline Block Carbon Cartridge Filter (CTO)
75 GPD Membran
10” Inline Coconut Post Carbon Filter
• After intalling the filters, unscrew membrane
housing cap. Insert the membrane into the housing
until it stops. Then, screw the housing cap.
• Cut the tube to a length that will allow to con-
nect the post carbon filter outlet to the faucet after
mounting the faucet and drain line.
• Loosen and pull out stem-nut on outlet of the
post carbon filter. Put the nut on tube and tighten
firmly. Insert the other side of the tube into res-
pectively yellow nut and collet placed under the
faucet. Push the tube to the faucet and tighten the
nut firmly.
Yellow nut
Faucet
embodiments
Hose
connection
Hose
HOSE CONNECTION SCHEME
As shown in figure;
A: Water inlet
B: Product water tube is connected to RO faucet.
C: The tube at the outlet of post carbon is conne-
cted to product water line.
D: The drain tube is connected to wastewater
outflow line.
RO FAUCET
WASTEWATER
WATER INLET
10
| ENJOY SMART
Ring
