10
| ENJOY COOL
MEMBRANE INSTALLATION
12” Inline 5 Micron Spun (Sediment) Filter
12” Inline Gac Carbon Cartridge Filter (UDF)
12” Inline Block Carbon Cartridge Filter (CTO)
75 GPD Membran
10” Inline Coconut Post Carbon Filter
• After intalling the filters, unscrew membrane
housing cap. Insert the membrane into the housing
until it stops. Then, screw the housing cap.
• Cut the tube to a length that will allow to con-
nect the post carbon filter outlet to the faucet after
mounting the faucet and drain line.
• Loosen and pull out stem-nut on outlet of the
post carbon filter. Put the nut on tube and tighten
firmly. Insert the other side of the tube into res-
pectively yellow nut and collet placed under the
faucet. Push the tube to the faucet and tighten the
nut firmly.
HOSE CONNECTION SCHEME
As shown in figure;
A: Water inlet
B: Product water tube is connected to RO faucet.
C: The tube at the outlet of post carbon is conne-
cted to product water line.
D: The drain tube is connected to wastewater
outflow line.
RO FAUCET
WASTEWATER
WATER INLET
Yellow nut
Ring
Hose
Faucet
embodiments
Hose
connection
