manualshive.com logo in svg

palintest Turbimeter Plus, Instruction Manual, Page: 16 / 51

Share
Download
palintest Turbimeter Plus Instruction Manual Download Page 16

Turbimeter

Mode

OK

Calibrate/ Check

System

Read

01/01/2017    09:30:30

User 1

123456

From the main menu select ‘Read’ mode and you will be 

given the following options:

This mode reads the turbidity of the sample in 

approximately 5 seconds.  

                         

See page 14

Normal

This mode takes multiple measurements and averages 

the results. This mode supports measurements where 

sample turbidity may be changing over time, for 

example due to settling of particles.   

      

See page 15

Average

This mode performs repeated normal readings of 

sample turbidity until measurement is stopped by the 

user.  This mode will support sample tube indexing and 

trending turbidity on settling samples. Trending arrows 

show the direction of turbidity change.

     

See page 16

Continuous Capture

This mode will measure the site specific relationship 

between turbidity and suspended solids.

Total Suspended Solids (TSS)

13

Read

       See page 18

Summary of Contents for Turbimeter Plus




















































Reviews:

No comments