46
USE AND & MAINTENANCE
7.1.2 Description of the menus
ICON
FUNCTION
DESCRIPTION
VALUES
Power
Stove output setting
1..5
Fan
This parameter is not enabled on water heating models
Temperature
Displays the room temperature reading and is used to set the desired
temperature.
6°C .. 51°C
Fuel
'LVSOD\VWKHRSHUDWLQJDXWRQRP\DQGUHVHWVWKHYDOXHZKHQ¿OOLQJWKH
pellet hopper
[FULL]
, or deactivates the warning
[OFF]
FULL - OFF
Timer
Enables or disables the timer. When enabled, the icon
will be
GLVSOD\HGVWHDG\QRWÀDVKLQJ
ON - OFF
ICON
FUNCTION
SUBMENU
DESCRIPTION
VALUES
Setup
[1]
Weekly timer
Assigns the programs (max 3) to the different days of the
week
[d1] ... [d7]
[2]
Programs
Program setting menu
[P1] ... [P6]
[3]
Time / date
Time and date setting
[4]
Hours remaining
Displays the number of hours remaining until recommended
maintenance. When “Hi” is displayed, the remaining time
exceeds 999 hours.
[5]
System
information
Displays the current software version
[6]
Water
temperature
It allows to set the desired temperature for the water supply
RQO\LQFRQ¿JXUDWLRQ
60 ... 80°C
[7]
Eco function
Enables or disables Eco Mode, in which the stove
automatically switches off and on based on room temperature
RQO\LQFRQ¿JXUDWLRQ
OFF; Eco
[8]
Restart delta
Is the number of degrees centigrade below the switch-
off temperature at which the stove switches on again
DXWRPDWLFDOO\H[FHSWLQFRQ¿JXUDWLRQ
0,5 ... 5,0°C
0 ... 40°C
[9]
Frost protection
temperature
Minimum temperature below which the stove switches on
H[FHSWLQFRQ¿JXUDWLRQ
OFF; 3 ... 20 °C
OFF; 3 ... 50 °C
[10]
Lock keypad
Disables the buttons on the keypad
OFF; Lo; Hi
[11]
Display brightness Sets display brightness
OFF; 1 ... 5
[12]
Display mode
Sets how the data is displayed
OFF; 1 ... 4
[13]
Buzzer volume
Sets the buzzer volume
OFF; 1 ... 5
[14]
Type of pellets
Three different types of pellet can be set
1 ... 3
[15]
External tank
Allows the activation of the manual loading from the
external tank (optional).
[30]
Installer menu
Sets/displays the stove configuration
PWD: “54”
[31]
Manual auger load
Manual activation of the pellet load system
PWD: “54”
[33]
Pump power
Menu relating to the service centre
PWD: “54”
[34]
Enable/Disable
Menu di competenza del centro di assistenza
PWD: “54”
[40]
Service menu
Menu reserved for the service centre
Submenus
[30]
and
[40]
in the Setup menu are password-protected and reserved for service centre personnel.