![background image](http://html.mh-extra.com/html/palazzetti/bella-idro/bella-idro_use-and-function_747709022.webp)
22
¿
g. 3.1
¿
g. 3.2
a
b
c
3 USING THE STOVE
3.1 START-UP
Before starting the stove you must check the following:
• The brazier must be clean and free from any ashes
• The hopper must be adequately
¿
lled
• The hearth door, the hopper lid and the ash box must
properly closed
• The stove must be connected to the mains and the
switch turned to the ON position
The stove is turned on and off by holding down the ON
button (found on the control panel
for a short time. (
¿
g.
3.1
n
.
The stove will begin a start-up sequence (
¿
g. 3.2 a-b-c
which is determined by the settings analysed by the unit.
When the stove is started the
¿
rst time, unpleasant odours or
smoke may be generated, caused by evaporation or drying
of certain materials used. This phenomenon will gradually
disappear.
The room should be well ventilated when starting the stove
the
¿
rst few times.
3.2 OPERATIONAL
SETTINGS
ADJUSTMENT
The following operational settings can be adjusted:
•
:DWHU5RRPWHPSHUDWXUH
,QVWDOODWLRQFRQ¿JXUDWLRQ
6HWWLQJ
5DQJH
Con
¿
gurations 1 - 2
Supply water temperature
60 ÷ 80 °C
Con
¿
guration 2
Room temperature
L - 10°C ÷ 40°C - H
Con
¿
gurations 3 - 4
Puffer water temperature
55 ÷ 75 °C
•
2YHQPDQDJHPHQW
•
OFF: Oven off
• Oven
light
•
Oven temperature 50 - 260 °C (oven light always on
•
0D[LPXP SRZHU
The maximum power level which can
be reached by the stove when it reaches the selected
temperature
.
•
Power can be adjusted on a scale of 1-5.
If the power level is too low, it could mean that the selected
temperature might be reached.