Palax KS50s
Translation
1-2012
28
8.8 Lubricating the spool shifter
The spool shifter is equipped with a pin and a
ball joint that require regular maintenance and
lubrication.
1. Lift up the edge of the protective rubber of the
spool shifter.
2. Spray lubricant on both sides of the pin and
down on the ball joint.
3. At the same time, check that the rubber is
intact.
8.9 Structure of the detent end and the correct order of the
parts, Fig. 8.7
Keep the cover E of the detent end depressed while undoing the valve
screws F, as the stiff springs can throw the cover off. This can also make
the springs and balls of the detent fly off.
