Ohjekirja Palax combi M 2004.1 En
11
The warranty does not cover
Defects due to normal wear, faulty operation or negligent maintenance.
The cross-cut saw-blade, V-belts or oils.
Defects in the machine due to any modifications which the buyer has made or ordered
from a third party and which have affected the machine in such a way that it can no
longer be considered to correspond to its original configuration.
Other possible expenses or financial demands due to the above-mentioned measures.
The travel expenses incurred while making repairs under warranty.
The combustion engine, whose obligations under warranty lie with the manufacturer of
the engine.
The warranty for parts changed during the warranty period expires at the same time as the
warranty period of the machine.
Consult your dealer about matters related to the warranty.
1.11 Operating instructions for the combustion engine
Refer to the engine’s instruction manual for detailed operating and servicing
instructions.
2
Taking delivery and pre-assembly of the machine
2.1 The transport set-up and unpacking
The machine is fixed to the pallet at three points.
Remove the plastic shroud covering the machine.
Take away all loose parts from the package.
Use a forklift truck to turn the machine into the horizontal position.
Remove the transportation pallet only after the machine has been turned.
2.2 Acceptance inspection
In order to save on freight expenses and to avoid damage during transportation, the
machine is delivered partly dismantled, with all the protruding levers and protective
structures removed and packed separately.
Check the delivered goods without delay.
If the product shows transport damage, contact the transport company and your dealer
immediately.