39
Palax D270 Active
Translation
1-2017
8.10.
Structure of the detent end and the correct order of parts
8.11
A
B
C
D
E
F
Keep cover C of the detent end depressed while opening screws C, as the stiff springs can throw
the cover off. This can also make the springs and balls of the detent fly off.
In connection with assembly of the detent end, apply a small amount of Vaseline to holes A of
the detent end. This ensures the balls stay properly in position during assembly. Make sure that
parts D and E line up in the right way, as shown in the picture.
The small holes at the ends of part E are for drainage of condensed water.
During assembly, make sure that the holes come on the underside.
8.11.
Discharge conveyor
The conveyor is equipped with hydraulic
transmission
The conveyor chains are equipped with
automatic spring tensioning.
The bearings of the conveyor are lubed-
for-life, so they do not require any
maintenance.
When operated continuously, the
conveyor chains should be lubricated
daily.
The easiest way to do this is to apply
chain spray lubricant to the chain while
the conveyor is rotating at low speed.
When the machine is left standing for
longer periods, it pays to lubricate the
chain properly to prevent it from rusting.
8.12
