10
Palax D270 Active
Translation
1-2017
1.7.
Safety instructions
General regulations and restrictions
The maximum length of log that can be cut without a log-stand is 3 metres.
The machine is exclusively intended for the production of firewood.
The machine may only be operated by one person.
The danger zone around the conveyor/out-take trough is 5 metres to the sides and away from
the conveyor.
Always lift and lock the in-feed deck and the conveyor/out-take trough in the transport position
for transportation.
Never remove any safety-related devices from the machine.
The transport width of the TR model is 2.37 m (with a 2.6-m conveyor).
The operator
Only persons over 18 years of age are allowed to operate this machine.
Every person operating the machine, must thoroughly study the entire user manual.
Always use eye guards and hearing protectors.
Always wear protective shoes.
Always wear work gloves.
Do not wear loosely-fitting clothing.
Before use
Always carry out the required preparations on both the machine and the conveyor/out-take
trough before starting the machine.
Make sure that all other people stay outside the operating range.
Only use a fault-free PTO shaft and attach the chain for the shaft-guard. The permissible
revolutions range of the PTO shaft is 400–450 r.p.m.
Only operate the machine on a sufficiently firm and level surface.
Only operate the machine in an adequately lit space.
Keep the tractor-powered machine hitched to the tractor. Ensure that sufficient space is
provided for the PTO shaft and its guard.
Always check that all the covers are intact and properly fastened.
Always ensure that the saw-chain is in perfect condition.
Always ensure that the electric conductors are intact.
Always check that all the controls are operational.
Always check the oil level and make sure that the hydraulic hoses and components are free of
damage.
Before starting the work, make sure that the machine is firmly in position.
During operation
Carelessness during the cut-off operation constitutes a major hazard!
During the cut-off operation, make sure that the log is always supported by the rear part of the
in-feed deck and the in-feed deck. Danger of rolling over!
Exercise particular caution when cutting knotty or crooked logs, because, as faulty cutting might
roll the log over or twist the saw-bar with enough force to break it.
Keep the working space clean and clear of foreign objects.
Always stop the machine and disconnect the power supply cable or the PTO shaft before
servicing.
