Palas VKL 10, Operation Manual, Page: 28 / 32

O
PERATION
M
ANUAL
VKL 10 /100
V
ERSION
V005-06-2020 28
10. Problems – what to do if the dilution system of the series VKL
does not work correctly:
10.1 Pollution of the dilution system
Please flash the instrument with dry, oil- and particle free compressed air by connecting the
instrument to compressed air supply nad close the inlet, e.g. with a absolute filter. The
compressed air flush the inner part of the instrument and therefore it is cleaned by itself.
Please also see the part of the maintenance.
For other problems please contact Palas® directly if a problem persists or cannot be resolved
with the information from the following sections:
Palas GmbH
Greschbachstr. 3b
76229 Karlsruhe, Germany
Telephone: +49 (0)721/96 21 30
E-mail: support@palas.de
Please indicate the serial number of the instrument within your support request!
10.2 FAQs
Table with known questions:
(Questions are currently being collected and will be listed in the next revision of this
document)
10.3 General
No components may be serviced or replaced in the dilution system of the VKL series without
instruction from a Palas® employee. In the event of infringement, the customer loses their
warranty claims; in addition Palas® is not liable for the damage arising.
In case of problems with the dilution system of the series VKL, please contact Palas® GmbH
(Tel.: 0721/96 213-0).