24
51-4771
MAINTENANCE
7.
Re-attach the core retainer plate.
8.
Lay core on ground. Lower body over core.
9.
Re-attach the bearing assembly with previously removed hardware in Step #2.
10.
Re-attach motor bucket mount with hardware removed in Step #1.
REPLACING HYDRAULIC MOTOR
The hydraulic motor comes as a complete kit.
1.
Tag and disconnect hydraulic hoses from the hydraulic motor.
2.
Remove klik pins securing the motor assembly to the sweeper.
3.
Slide the motor assembly out of the sweeper while leaving the hex receiver plate at-
tached to the core.
4.
Inspect the hex receiver plate for damage and replace if required.
5.
Your new replacement motor assembly will come complete with bucket mount and hex
hub. Install the new motor assembly into the sweeper and secure in place using the
existing klik pins.
6.
Install hydraulic hoses onto the new motor.
MOTOR KIT ASSEMBLY
KLIK PINS
TAG HOSES
COLD PLANER SPECIAL
STANDARD 215 CORE
DENSELY
PACKED
SECTIONS
A
B
C
D
NOTE: This will give you a densely packed section in the middle of your brush head
the same width as your planer. The brush marker decals on the brush hood should be
placed to identify this area for the operator during operation.
FIGURE #4A
FIGURE #4B
