paladin 40892, Operator And Parts Manual

Page: 24 / 43

TROUBLESHOOTING
10416 9-26-05
PROBLEM POSSIBLE CAUSE REMEDY
Insufficient compaction Loader “down pressure” Increase the “down pressure”
insufficient by raising the front wheels off
the ground (see Operation)
Operating RPM too slow Increase RPM to half throttle
Does not vibrate Hydraulic couplers mal- Replace
functioning
Hydraulic couplers not Check and tighten couplers
completely engaged
Hydraulic motor damaged Replace motor
Relief Valve damaged Replace Relief Valve
Roller shaft bearings damaged Replace
Low oil supply Check for oil leaks and
service as required
Excessive noise and/or Isolator’s worn Replace Isolators
vibration
Operating RPM too slow Increase RPM to half throttle
Hydraulic motor damaged Replace
Oil leaking Oil seals damaged Replace
Relief Valve damaged Replace
Hydraulic motor damaged Replace
Bearings damaged Replace (replace oil seals at
the same time)
Broken or loose hydraulic Check for leaks and repair
lines or fittings or replace
Drum will not turn Frame installed incorrectly Check frame for correct
installation and all hardware
intact.
Bearings damaged Replace
Binding between frame and Remove
drum.
Vibratory roller not tilting Guide retainer on hitch too Add or remove shims from
correctly loose or too tight hitch
22 75595