Page. 1
From 13
SECURITY INFORMATION
WARNING
The device is intended for the aerial heating of industrial
agricultural
premises
in
accordance with the regulatory requirements of Msz EN
525:2001. The device is intended for temporary or
permanent heating of industrial and agricultural
facilities. With proper operation, this device is safe and
saves energy. Combustion products formed during the
combustion process, mixing with the flow of warm air,
fall into a heated room.
Due to the fact that it is impossible to predict all possible
applications of the device before you install it , it is
necessary to coordinate its use with the local fire safety
department.
The gas connection must comply with current
requirements, regulations, in accordance with which
work must be performed on the natural gas supply, in
case of compliance with liquefied gas storage rules.
Carbon monoxide poisoning : The primary symptoms of
poisoning are very similar to colds, in addition, can
cause headaches, dizziness, nausea. If you experience
the symptoms above - you need to get out of the room
immediately, get some fresh air.
Propane or P/B gas: Propane and P/B gas are
odorless, adding aromatic substances to detect its leak
in a timely manner. However, even without a sense of
distinctive smell, gas leakage and its presence in the
surrounding air are possible.
Make sure you have read and understood all the
warnings, compliance with which the device will be safe
and optimal:
-
When you install and work, you comply with current
requirements and rules regarding gas usage equipment.
-
Connecting the device to power should be done in
strict accordance with the Operating Manual .
-
For your own safety, make sure the ground floor is
correct
.
-
When managing a device indoors
,
provide ventilation
for supply.
-
Use the device only in well-ventilated parts. The
amount of
air
required for combustion and ventilation is
indicated in Annex No. 1 of this manual.
-
Protect the device from the following possible
impacts: wind, strong water, rain or drip of water.
-
Do not use the device in open space.
-
It is strictly
forbidden
to use
the device
in rooms
intended for sleeping or long-term stay of people.
-
Adhere
to the requirements of a safe distance
to
place the device in relation to flammable materials, such
as fuel, gasoline, solvent, etc.
Flammable fumes, fluids.
-
Don't use the device in heavily dusty rooms , because
the dust is ignited as well.
-
When we work, consider that the device is equipped
with an individual thermostat and that, in accordance
with the specified parameters, it may start operating at
any time
-
Before starting the device, always perform a visual
inspection, if any damage is detected, do not turn on
the device.
-
Do not install a liquid gas device in semi-basement
and basement rooms,
as
the specific gravity of
liquefied gas is heavier
than
air and in the event
of a
possible
leak tends to lower the premises.
-
Use only flexible hoses and gearboxes
recommended by the manufacturer.
-
Before each start-up, check the
integrity of
the gas
connection,
if
you find damage, fractures to the flexible
hose, replace
it
with the slag recommended by the
manufacturer
.
-
Install or suspend the device only on such structures
that, regardless of the heating of the device, remain
stable.
-
Don't allow children and animals
to work.
-
If you plan not to use the device for a long time , be
sure to turn off the power and gas connection.
-
Never block air intake and
blow holes.
-
Do not move or repair the device while you are
working, and the voltage device is turned off.
READ MORE: Work has
was tightened in maune premises
Warning: Explosive danger. Strictly adheres to the
request to place the virgin in a heated room in relation
to flammable materials (construction structures, paper,
cardboard).
Never use a virgin in rooms that are
gassed by gasoline fumes, solvents or
other
chemical
compounds, as well as in heavily dusty rooms.
