Product disposal
Troubleshooting
7. Product Requirements and Major Parametric
Description
Product Power Requirement
a) Power source: Rechargeable lithium battery3.7v/100mAh
b) Device safety classes: class II type BF
Product Main Technical Parametric description
a)Impulse frequency:
TENS:20-100Hz
Problem
Analysis of cause
Recommended
Solution
In order to avoid environmental pollution, please dispose of Aegis
according to local environmental requirements. Do not discard in
your standard waste disposal.
The device does
not power up
correctly
The buttons are
not functioning
correctly
The device does
not emit any
"beep" sound
There is no
output (electrical
pulses) or the
output feels low
The battery is running
low or running out
The button is damaged
The battery is running
low or running out
The button is damaged
The speaker is
damaged
The battery is running
low or running out
The gel pad is
damaged or dirty, has
no stickiness or is
making poor contact
with the skin
Skin is too oily
Recharge the battery
Wipe the gel pad with
moist fingers. Allow to
dry before re-use.
Alternatively, replace
with a new gel pad
Wipe skin with a wet
towel or alcohol wipe.
Recharge the Battery
Contact the point of
purchase
Recharge the Battery
Contact the point of
purchase
Contact the point of
purchase
11
10
The skin is
strongly
irritated/shows
signs of
redness
The treatment has
been applied too long
The intensity is set too
high
The gel pad is not
making good contact
with the skin
There may be an
allergic reaction to the
gel pad
The gel pad is dirty
Limit treatments to 15
minutes
Decrease the intensity
to a more comfortable
level
Press the gel pad
firmly against the skin
to improve contact
Cease use of the
device
Clean the gel pad
The device is damaged Allow to dry before
using the device
Contact the point of
purchase