Now press the power button on the remote control. Two beeps
will sound to indicate that the remote and the Aegis device are
paired.
4. Adjusting Intensity
Press the “+” button on the remote control repeatedly to increase
the intensity to a level you find comfortable. Alternatively, you can
use the buttons located on the power unit itself. If the intensity
becomes too strong, press the “–” button to reduce the strength of
the pulses.
The device will beep with each step up or down in intensity. There
are 16 steps of intensity in total.
5. Changing Functions and Modes
Aegis offers two main settings:
Automatic Function
– This setting delivers combinations of
different frequencies and lengths of pulses
Manual Function
– This setting allows you to select one specific
type of pulse.
Upon activation the device is automatically set to Automatic
function. The letter “A” displays in the upper left corner of the
screen.
Press the “F” (function/mode) button on the remote control quickly
to cycle through different combinations of pulses to find a mode
that you prefer. There are 6 modes in Automatic function.
Each time you switch Function or mode the device intensity will
reset to level “1”.
To switch to Manual function press and hold down the “F” button
on the remote control. The letter “M” will display in the upper left
corner of the screen.
Press the “F” button briefly to cycle through the pulse modes.
There are 9 pulse modes in Manual function.
2. Attach the power unit to the main unit
The power unit attaches to the main unit via two metal press studs.
Align the press studs, then push firmly until the control unit clicks
into place.
3. Applying Aegis
IMPORTANT:
BEFORE USING AEGIS IT IS ESSENTIAL TO
WASH AND DRY THE AREA OF APPLICATION THOROUGHLY.
THIS WILL ENSURE THE DEVICE ADHERES CORRECTLY TO
THE SKIN. CLEANSING WIPES CAN ALSO BE USED FOR THIS
PURPOSE.
After cleansing and drying the skin, apply Aegis to the desired area.
Ensure that the gel pads are firmly pressed against the skin. A poor
connection will affect performance.
Press the power button on the power unit to activate the device.
A beep will sound and a green light will show.
07
06