6 9710 VCA
000216
( ) R22
6800
blue-grey-red
( ) R39
910k
white-brown-yellow
( ) R43
910k
white-brown-yellow
listed below: 91k
white-brown-orange
( ) R61
( ) R63
( ) R72
( ) R77
Disk Capacitors
Many of the capacitors used in the 9730 are nonpolarized
Ceramic Disk types. For each of these, either lead can go in
either of the holes in the circuit board. The leads are already
parallel to each other but still may need to be bent slightly to
match the spacing of the circuit board holes. Like the resistors,
insert the leads of these parts through the holes in the board
and push the part against the circuit board as far as it wants to go.
Don't force it, it's OK if it sits a little off the board.
Capacitors are often marked with obscure codes that
indicate their values. The 3 digit number that specifies
value may be preceded or followed by letters indicating
such things as tolerance. If you get confused about
which capacitors are which, it may help to group them
by same type and check them against quantities on the
packing list at the end of this manual.
DESIGNATION VALUE MARKING
( ) C18
0.005
502
( ) C22
0.005
502
( ) C23
0.005
502
listed below: 0.01
103
( ) C3
( ) C5
( ) C7
( ) C9
( ) C10 ( ) C13 ( ) C17
listed below: 100pF
100
( ) C8
( ) C11 ( ) C12 ( ) C14
( ) C15
Ceramic Disk
Capacitors
