PACOM PDRH-440, User Manual

Page: 57 / 70

4-Channel Digital Video Recorder
49
The individual playback controls at the bottom perform the following functions as described below:
Go to the previous image Play/Pause Go to the next image
Fast backward play Fast forward play
Selecting in the top-left corner exits the Record Table Search screen.
Motion Search
You can also narrow your event search by selecting the Option… button and setting up the new search condition.
Highlight the box beside To and press the button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be from the last recorded image.
Highlight the box beside
Type
and press the button. You can select between
Motion Search
and
Museum Search
.
Motion Search
detects motion in the defined area.
Museum Search
detects if a defined object has moved.
Highlight the box beside Zone and press the button. An image from the video appears with a grid overlaid. You
can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion.
NOTE: Defining the area of the image in which you want to search for motion is nearly identical to setting up
the DVR for Motion Detection. Please refer to
Motion Detection s creen in Chapter 3 — Configuration for more
detailed instructions on setting up the detection blocks.
NOTE: When setting the Museum Search Zone, the zone should be placed inside of the border line of the target
object. If the selected block is placed on the border line, the sensitivity of the Museum Search may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside
Sensitivity
and press the button. You will be able to select from
1
(low sensitivity) to
5
(high sensitivity).
Highlight the box beside Min. Blocks and press the button. You will be able to set the number of sensor blocks
that must be activated. Setting the Min Blocks will only be available if Motion Search is selected.
Once you set your desired search conditions, highlight Search and press the button to display the search results in
the Motion Search screen. Selecting Cancel exits the screen without saving the changes.
Figure 62 ─ Motion Search screen.
The Motion Search… can be selected from the Search menu
while the DVR displays the camera full screen. The Motion
Search screen displays a list of motion events. Use the arrow
buttons to highlight the event for which you would like to
see video and press the (Enter) button to display the video
associated with the selected event on the small search screen.
Highlighting Close and pressing the button will extract the
video associated with the Motion event and display the first
image of the event. Pressing the button will start playing
the “event” video segment. Pressing
Playback Mode
button
returns to live monitoring.
You can search video from the first to last recorded images, or you
can set the start and stop times and dates.
Highlight the box beside From and press the button to toggle
between On and Off. When set to Off, you can enter a specific Date
and Time. When set to On, the search will be from the first
recorded image.