Pacmac 2015, Operator'S Manual, Page: 6 / 74

2015 OPERATIONS MANUAL
5
FROM THE RUN SCREEN, YOU MAY SELECT THE FOLLOWING.
SELECT PROGRAM
 TO SELECT A PROGRAM, THE OPERATOR MUST FIRST TOUCH THE
SELECT PROGRAM BUTTON, TO DISPLAY THE PROGRAM
SELECTION SCREEN.
 THE OPERATOR CAN NOW CHOOSE A PROGRAM BY TOUCHING
THE NAME OF THE DESIRED PROGRAM.
 THE NAME WILL THEN HIGHLIGHT.
 TOUCH THE ACCEPT BAR AND THAT PROGRAM WILL BE LOADED.
SELECT FILLED OR EMPTY BAGS
 THE OPERATOR MAY SELECT FILLED OR EMPTY BAGS BY USING
THE FILLED/EMPTY BUTTON.
 SELECTING FILLED OR EMPTY BAGS CAN ONLY BE DONE WHEN
THE MACHINE IS STOPPED.
 TO SELECT EMPTY BAGS, TOUCH THE WORD EMPTY.
 WHEN THE MACHINE IS SET TO RUN EMPTY BAGS, THE JAWS WILL
STAY OPEN AFTER EACH CYCLE.
SELECT SINGLE OR CONTINUOUS BAGS
 THE OPERATOR MAY SELECT CONTINUOUS CYCLE OR SINGLE
CYCLE BY TOUCHING THE CON’T/SINGLE BUTTON.
 WHEN EMPTY/CONTINUOUS IS SELECTED, THE MACHINE WILL RUN
UNTIL THE STOP BUTTON IS TOUCHED OR AN E-STOP CONDITION
IS REACHED.
 WHEN FILLED/CONTINUOUS IS SELECTED, THE MACHINE WILL
ONLY CYCLE WHEN AN INPUT FROM THE SCALE OR RESET/START
BUTTON IS RECEIVED.
 WHEN EMPTY/SINGLE IS SELECTED, THE MACHINE WILL MAKE AN
EMPTY BAG EVERY TIME THE RESET/START BUTTON IS PRESSED.
STOP THE MACHINE
 THE OPERATOR MAY AT ANY TIME STOP THE MACHINE BY
TOUCHING THE STOP BUTTON. IF THE STOP BUTTON IS TOUCHED
DURING A CYCLE THE MACHINE WILL FINISH ITS CYCLE AND THEN
STOP.