17. This device draws 5.0 amperes during
operation. To prevent overloading a
circuit, DO NOT plug the device into a
circuit that already has other appliances
working.
18. It is normal for the plug to feel warm to
the touch; however, a loose fit between
the AC outlet (receptacle) and plug may
cause overheating and distortion of the
plug. Contact a qualified electrician to
replace loose or worn outlet.
19. Use of this device is not recommended
for persons with reduced sensitivity to
heat or an inability to react to avoid
burns.
20. This device includes an Overheat
Protection System that shuts the heating
unit off if it overheats due to abnormal
conditions. If this occurs, turn the
device off, unplug it, and remove all
contents from the device. Allow the
device to cool for a few minutes, plug it
back in, and resume normal operation.
21. If your device fails to operate
a. Make sure your circuit breaker or
fuse is working properly.
b. Make sure the device is plugged
in and that the outlet is working
properly.
c. Check for and remove any
obstructions close to the
heating unit.
d. DO NOT ATTEMPT TO OPEN
OR REPAIR THE HEATING
UNIT YOURSELF. DOING
SO COULD CAUSE DAMAGE
OR PERSONAL INJURY. IF
THE PROBLEM PERSISTS,
CONTACT PackTite™
22. Do not place infants or animals in the
bag or allow them to get inside the bag.
23. This device is intended for use by
persons 18 years and older.
24. Do not use in an oxygen-enriched
environment.
25. Never pull this device by the electrical
cord.
26. Do not bend or pinch the cord and do
not use if the cord is damaged.
27.
SAVE THESE INSTRUCTIONS.
INSTRUCTIONS FOR USE
