Packshot
Creator
R3 Mark II
COMPONENT REPLACEMENT
ACCESS THE BACK LAMP:
01
02
03
Remove 2 small white hand screws
and the holding bracket on the top
of the curved background.
Lift to remove the curved
background from the system with
2 people at opposite sides.
Note:
When re-installing
the curved background, we
recommend to slide it down with
2 people at opposite sides. Use
one hand to brace and guide the
bottom corner into the curved rail
and then press it down until it flush
with the bottom background.
ACCESS THE BOTTOM CORNER LAMP:
01
02
03
Loosen the 3 hand screws and
remove the side rails. Also remove
the 3 hand screws on the curved
guiding rails.
Remove the end blocks using a
Phillips screwdriver.
Carefully remove the bottom
glass plate and curved guiding
rails away from the system by
liing up and forward.
Note:
We
recommend 2 people one on each
side holding onto the bottom glass
and curved guiding rail.
