Packshot
Creator
R3 Mark II
SYSTEM PLACEMENT
DISASSEMBLY:
01
02
03
Unplug the 2 metal connectors.
Unplug the power connector.
Remove 6 white hand screws, 3 on
each side.
Slide the back light panel away
from the 2 dowel screws, then lift
up and separate completely from
the bottom light panel.
Note:
The back light panel is very
heavy, recommend 2-4 people.
Once the 2 panels are separated,
you can slide the bottom
background backward and lay the
bottom light panel vertically, so as
to move them individually through
small spaces. Reverse steps 01-05
to reattach the 2 light panels.
04
05
06
