manualshive.com logo in svg

Pack Leader PRO-625W, Operation Manual

Share
Download
Pack Leader PRO-625W Operation Manual Download Page 20

1A

1B

2D

1

C

2C

1D

2B

2A

2E

3A

Please follow steps and instruction for machine operation.

Plug-in the appropriate power supply voltage.

Press “Wrap Around ON/OFF” to switch two 

sides labeling mode and round bottle labeling 

mode.

The display will shows as diagram 1.

Turn of the power (Turn on the emergency stop 

switch if in “off” condition).

Press AUTO LENGTH icon to get in diagram 3-2 

to start label length setting. Two ways to setting 

label length: Auto and Manual length set.

Press “Enter” to get into next diagram or wait 

for 3 seconds.

Press “Guide Mode” for showing machine 

operation instruction.

Press “Setting Mode” for set up machine 

information and speed.

Press “Memory Mode” for memory setup.

Press “Labeling Mode” to enter diagram 3-1 or 

wait 5 seconds for next diagram.

   |   20

MACHINE OPERATION

DIAGRAM 1

DIAGRAM 2

DIAGRAM 3-1

Summary of Contents for PRO-625W




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands