Pack Leader PRO-625W, Operation Manual

Page: 16 / 131

To adjust wrap around station widths: As
follow drawing show, put object between
wrap around belt and pressure plate.
Adjust frontward and backward screw E,
let pressure plate press object with suitable
pressure. Then turn on conveyor to check
object and be turned smoothly.
Wrap around belt adjustment: To adjust the
tightness and centering the belt, adjust the
screw A. When adjusting, use only small
increments and let the belt run for a while
to determine the final position. A belt that is
not centered will slip up or down.
To adjust wrap around station height: only
adjust screw C and D so you can adjust wrap
around belt and pressure plate height.
| 16
PARTS ADJUSTMENTS
5.
Wrap around station adjustment:
Wrap Around Belt
Pressure Plate
High & Low Adjust
High & Low Adjust
Frontward & Backward Adjust
A
B
C
D
E
HIGHER LOWER
2 1
E
A B
D
C
A